- No products in the cart.
Hardware Decor has a large selection of closet rod profiles and finishes available for custom cut. Follow these steps to find your custom cut rod length.
Step 1: Measure from wall-to-wall or mounting surface-to-mounting surface. This is called the “Total Width” or “TW”. Be sure to use the exact locations where you will be mounting your closet rod and flanges or as close as possible, and measure as precisely as possible since walls are not perfectly flat.
Step 2: Choose the closet rod profile you’d like, and pick a flange combination that suits your style and needs. Note that each flange combination has a different flange space, or amount of space required for the flange. Subtract the flange space needed from the Total Width.
View Flange Chart For Oval rod
View Flange Chart Large Round 1-5/16 Inch Diameter rod
View Flange Chart standard 1-1/16 Inch Diameter rod
Step 3: Plug these measurements into the equation below to find your custom cut rod length.
TOTAL WIDTH minus FLANGE SPACE = CUT LENGTH
If you need help doing the math, you can use our Fraction Calculator which opens in a new tab: Fraction Calculator
You can see the video on this topic following this link
